top of page
Search

7 Steps to Installing Living Walls in Office Lobbies

2d
8 min read

Last Updated: November 16, 2026

Quick Summary

Installing living walls in office lobbies follows seven steps: site survey, design and plant schedule, wall preparation, irrigation and drainage first fix, module mounting, planting, and commissioning. Confirm structural load capacity and complete waterproofing before fixing, and keep a clear accessible route through reception throughout the work.

  • A structural engineer should confirm the wall's load capacity and specify the fixing method.

  • Irrigation and drainage first fix must run before any planting, while the wall is bare.

  • Hydroponic systems are lighter but rely entirely on irrigation; soil-based walls buffer moisture better.

  • Reliable low-light choices include ferns, peace lilies, spider plants, philodendron and pothos.

  • The first three months need closer attention while plants establish after commissioning.

Planning a living wall for your lobby?

Pemigogardens maintains grounds for private offices and business parks across the Thames Valley.

Table of Contents

What to Check Before Installing Living Walls in a Lobby

Installing living walls in office lobbies succeeds or fails long before the first plant goes in. The survey work you do in the first fortnight decides whether the wall thrives for a decade or becomes an expensive water feature.

A living wall is a vertical planting system that mounts a growing medium and irrigation network onto an interior wall, supporting plants without floor space.

Structural Support and Wall Preparation

Start with the wall itself. A saturated living wall system is heavy, and the load has to transfer safely into the building structure, not just the plasterboard.

Wall preparation covers three things: waterproofing behind the system, a vapour barrier where the wall separates heated and unheated space, and a clear mounting zone free of services. Chasing fixings into a wall without a services scan risks hitting conduit or pipework.

Lighting, Airflow and Humidity

Most lobby plants need supplementary lighting unless the space gets strong natural daylight for most of the day. LED grow fittings on a timer usually solve this.

Facilities manager and landscaper planning space for living walls on a blank office lobby wall

The Living Wall Installation Process, Step by Step

The living wall installation process runs in a fixed order, but in a lobby the sequence has to be wrapped around reception operations. Visitors are still arriving, deliveries are still being signed for, and the front desk cannot be screened off for a fortnight.

  1. Site assessment and survey - confirm structure, services, light levels and access routes. Allow time on site for the survey, plus a follow-up if a services scan or structural check is needed.

  2. Design and plant schedule - agree the layout, species mix and module type. Sign-off time depends on the survey outcome and any landlord or building-control approval the design requires.

  3. Wall preparation - waterproofing, framing and fixing points installed. This is the dustiest stage; plan it for a quiet period and protect adjacent finishes.

  4. Irrigation and drainage first fix - pipework, tank and drainage run before any planting. Get the services right while the wall is still bare, because irrigation hidden behind planted modules is almost impossible to service.

  5. Module mounting - panels or cassettes fixed and levelled. Access equipment is the constraint here: a tall lobby may need a mobile tower or scissor lift, which has to be booked and may need a permit.

  6. Planting - plants set at the agreed density and watered in. Planting is usually among the quicker stages.

  7. Commissioning - irrigation tested, lighting timed, handover with a maintenance schedule. Do not sign this off until the controller has run a full cycle and the drainage route has been checked under load.

Larger or higher walls, or those needing structural strengthening, generally take longer from survey to handover. Set that expectation with reception staff early so they can plan around the noisiest days.

Keeping the Lobby Open During Installation

Lobby-specific planning is what separates a smooth install from a disrupted reception. Work through these constraints before the first delivery arrives:

  • Visitor traffic and accessibility - keep a clear route from the entrance to the desk at all times, with a minimum accessible width maintained. Barriers and floor protection should not block a wheelchair user or a pushchair.

  • Reception sightlines and security - do not screen the desk so heavily that staff lose sight of the entrance. Agree with the building's security team where contractors will enter, sign in and store materials.

  • Noise and dust - drilling and cutting should be scheduled outside peak arrival times, and dust sheets and negative-pressure extraction used where finishes are sensitive.

  • Coordination with facilities - confirm isolations for water and power, permit-to-work requirements, and who signs off the completed wall. A short daily check-in with the facilities team prevents most surprises.

  • Deliveries and waste - agree a delivery window and a waste route so packaging and offcuts do not pile up in the reception area.

Starting first fix before the permit-to-work and isolation arrangements are confirmed can stall a lobby install, because the water or power may not be safely isolated on the day.

Hydroponic vs Soil-Based Systems

Hydroponic systems grow plants in an inert medium fed by nutrient solution, while soil-based systems use a lightweight growing mix. Hydroponic walls are lighter and give tighter control over feeding, but they depend entirely on the irrigation system working. Soil-based walls buffer moisture better and forgive a missed service, though they weigh more and can attract fungus gnats if overwatered.

System

Weight

Watering Tolerance

Best For

Hydroponic

Lighter

Low, relies on irrigation

Tight load limits, precise feeding

Soil-based

Heavier

Moderate, buffers moisture

Lower-maintenance lobbies

Modular cassette

Varies

Depends on medium

Fast installation, easy swaps

Continuous felt

Light

Low to moderate

Large feature walls

Living Wall Irrigation and Drainage Explained

Living wall irrigation and drainage is the part that decides long-term reliability. Most systems use drip lines or capillary matting fed from a tank, with a controller running timed cycles.

Two failure modes dominate. Blocked drip emitters starve the top of the wall while the base stays wet. If you are weighing up controls and building management integration, our guide to integrating smart irrigation in office landscaping covers the options.

Choosing Plants for Indoor Living Walls in Reception Areas

Plants for indoor living walls in reception areas need to tolerate low light, steady warmth and regular irrigation. Reliable choices include ferns, peace lilies, spider plants, philodendron and pothos, with structural species such as aspidistra for larger panels.

Avoid species that drop sap onto visitors or need high light. A common mistake is choosing plants for their colour in the plan and ignoring how they perform in the actual light levels of the space.

Living Wall Maintenance and Post-Installation Care

Living wall maintenance settles into a rhythm after commissioning. Routine care for a living wall generally covers irrigation checks, plant health, pruning and algae control on the felt or modules. Seasonal replanting keeps the wall looking deliberate rather than tired.

The first three months need closer attention while plants establish. After that, most walls need routine care and periodic servicing of pumps, sensors and drainage. Keep a simple log: what was watered, what was replaced, what failed. That record is what turns a wall from a novelty into an asset.

What Drives the Cost of a Lobby Living Wall

Cost for a lobby living wall depends on wall area, system type, access difficulty and the services work required. A wall on a ground-floor lobby with a nearby water supply and waste connection is simpler than one above a finished reception desk with no drainage route. Because every lobby differs, treat any single headline figure with caution and ask for a project quotation based on your actual wall and services.

Understanding the cost drivers helps you compare quotes like for like. The main ones are:

  • Wall area - the largest single driver. Cost scales broadly with square metres of planted face, but not linearly, because fixed costs such as controls and commissioning are spread across the area.

  • System type - hydroponic, soil-based, modular cassette and continuous felt systems carry different material and labour costs, and different long-term maintenance profiles.

  • Access equipment - a tall lobby may need a mobile tower or scissor lift, plus permits and out-of-hours working. Access can add a meaningful share to the installation cost on high walls.

  • Irrigation and drainage - a nearby water supply and waste connection keeps first-fix cost down. A long pipe run, a recirculating tank or a pump-up arrangement adds cost and complexity.

  • Lighting and electrical - supplementary LED grow lighting, timers and any building management integration are separate line items.

  • Structural survey and design fees - a structural engineer's check and a planting design are professional fees that sit alongside the physical install.

Lifecycle Costs to Budget For

The headline installation figure is only part of the picture. Lifecycle cost matters more over a decade, and it breaks down into recurring items:

  • Routine maintenance - a weekly or fortnightly visit covering irrigation checks, plant health, pruning and algae control. This is the largest recurring cost and is usually quoted as a monthly or annual contract.

  • Replacement plants - seasonal replanting and losses, higher in the first three months while plants establish.

  • Consumables - nutrient solution for hydroponic systems, growing medium top-ups, and replacement emitters or capillary matting.

  • Annual service - pumps, sensors, controllers and drainage checked and serviced once a year.

  • Electricity - lighting and pump running costs, which depend on the lighting schedule and system type.

Maintenance and replacement over several years can add up to a significant share of total cost, so compare quotes on whole-life cost rather than install price alone. Ask each supplier to itemise installation, commissioning and the first year of maintenance separately, and to state what is excluded.

We do not publish fixed figures because every lobby differs; ask for a project quotation based on your actual wall and services.

Living Walls vs Preserved and Artificial Alternatives

Preserved and artificial walls need no irrigation, lighting or plant care, which can simplify ongoing running.

Living walls offer a distinct visual effect and a planted look that differs from preserved or artificial alternatives. If you want the full picture of what commercial landscaping can include, our commercial landscaping services guide sets out the wider options. For broader ideas to pair with a planted wall, see these commercial landscaping ideas for offices.

Planning Your Lobby Living Wall with Pemigogardens

A lobby living wall is a landscaping project with an engineering brief attached.

Pemigogardens works exclusively with private offices and business parks, delivering regular maintenance contracts tailored to each site. If you are still weighing up suppliers, our guidance on choosing landscaping for corporate offices and how to choose office landscaping contractors will help you ask the right questions.

We hold excellent references, including from Adair House in Windsor and Comino House in Bourne End.

The challenge with any planted feature is the care that follows the install. A living wall that is commissioned well and then neglected looks worse than a blank wall within a year.

Frequently Asked Questions

How long does it take to install a living wall in an office lobby?

Installation time depends on the size of the wall and any structural work needed. Ask for a written programme that separates design, off-site preparation and on-site fitting so you can plan around reception closures.

How much maintenance does an office living wall need?

Plan for regular maintenance visits. Routine care generally covers watering checks, irrigation and drainage inspection, trimming, replacing failed plants and monitoring for pests or disease. Plant health in a lobby depends heavily on light and airflow, so expect the first few months to need closer attention while the wall establishes. A maintenance contract with a fixed visit schedule helps keep the wall looking presentable for clients.

Can a living wall be installed on any office wall?

No. The wall must carry the weight of the frame, growing medium, mature plants and saturated irrigation water, which is considerable once fully planted. A structural check should confirm load capacity before anything is ordered. You also need a water supply and drainage route nearby, adequate light or supplementary fittings, and fire performance that satisfies building requirements. Walls that fail these checks can often still take a preserved or artificial alternative, which avoids the weight and water demands entirely.

What should a living wall installation quote include?

When comparing quotes, ask each supplier what is included and excluded, including making good, electrical work for grow lighting and safe disposal of packaging. Request a lifecycle view covering maintenance and plant replacement over the first year, not just the install price, so you can compare quotes on equal terms.

 
 
 

Comments


eco friendly

READ MORE
bottom of page